吡啶-2-甲醛肟钛氧簇合物的合成、结构调控及光电性质

通过溶剂热合成方法,以吡啶-2-甲醛肟（HPycox）和Ti（OⁱPr）₄合成了双核钛配合物[Ti₂（μ₂-O）（Pycox）₂（OⁱPr）₄] （1）。通过结构分析,分别使用二苯基膦酸和苯基膦酸对其进行结构调控,成功制备了三核钛配合物[Ti₃（μ₂-O）₂（Pycox）₂（Ph₂PO₂）₂（OⁱPr）₄] （2）和六核钛配合物[Ti₆（μ₂-O）₂（μ₃-O）₂（Pycox）₂（PhPO₃）₄（OⁱPr）₆]·2CH₃CN （3）。配合物1~3的光学带隙分别为2.89、3.00和2.87 eV,其中配合物2的光电流密度可达0.1 μA·cm^-2。     

Synthesis,crystal structures,and magnetic properties of cobalt(II)-hexafluoro-acetylacetonate complexes with two new triazole-substituted nitronyl and imino nitroxide

Two new chelating radical ligands, NITphtrz (4,4,5,5-tetramethyl-2-(2-phenyl-1,2,3-triazole-4-yl)imidazoline-1-oxyl-3-oxide) and IMphtrz (4,4,5,5-tetramethyl-2-(2-phenyl-1,2,3-triazole-4-yl)imidazoline-1-oxyl), and their cobalt(II) complexes [Co(Hfac)₂(NITphtrz)] (I) and [Co(Hfac)₂(IMphtrz)] (II) (Hfac = hexafluoroacetylacetonate) have been prepared and characterized by IR, magnetic, and single-crystal X-ray analysis. The magnetic behaviors of the lignad NITphtrz and complex I have been discussed.     

Effect of lattice strain on the oxygen vacancy formation and hydrogen adsorption at CeO2(111) surface

Using first-principles calculation, the effect of lattice strain on the oxygen vacancy formation at CeO₂(111) surface has been investigated. The tensile strain facilitates the oxygen vacancy formation at the surface and the compressive strain hinders the process. This is in part due to the strengthening or weakening of the surface Ce–O bond under the lattice strain. On the other hand, a more open surface with a larger lattice constant can better accommodate the larger Ce³⁺ and thus facilitate the structural relaxation of the reduced surface. The studies on the strain effect on the atomic hydrogen adsorption at the defect-free CeO₂(111) surface show that the adsorption strength monotonously increases with the increase of the lattice strain, further confirming the tunable surface chemical activity by lattice strain.     

关于Pn3的优美性

设G(V,E)是一个简单图,对自然数k,当V(G^k)=V(G,E(G^k)=E(G)∪{uv|d(u,v)=k},则称图G^k为k-次方图,本文证明了图P_n³的优美性。     

Preparation of carbon coated Fe3O4 nanoparticles for magnetic separation of uranium

Uranium(VI) was removed from aqueous solutions using carbon coated Fe₃O₄ nanoparticles (Fe₃O₄@C). Batch experiments were conducted to study the effects of initial pH, shaking time and temperature on uranium sorption efficiency. It was found that the maximum adsorption capacity of the Fe₃O₄@C toward uranium(VI) was ∼120.20 mg g⁻¹ when the initial uranium(VI) concentration was 100 mg L⁻¹, displaying a high efficiency for the removal of uranium(VI) ions. Kinetics of the uranium(VI) removal is found to follow pseudo-second-order rate equation. In addition, the uranium(VI)-loaded Fe₃O₄@C nanoparticles can be recovered easily from aqueous solution by magnetic separation and regenerated by acid treatment. Present study suggested that magnetic Fe₃O₄@C composite particles can be used as an effective and recyclable adsorbent for the removal of uranium(VI) from aqueous solutions.     

钾掺杂对三联苯的超导特性探寻

新型超导材料的设计合成及其超导机理的探索是目前凝聚态物理学领域的重要研究方向. 本文采用高真空热烧结方法制备了钾掺杂对三联苯粉末材料并表征了它们的晶体结构、分子振动、磁学及超导特性. X射线衍射图谱和拉曼光谱表明在烧结样品中除存在钾掺杂对三联苯和KH外, 还含有苯环重组的C₆₀和石墨成分. 拉曼光谱中部分峰位的红移进一步证实钾成功掺入对三联苯分子晶体中并将4 s电子转移到C原子上. 零场冷却磁性测量结果表明: 多数样品在整个温度测量区间表现为居里顺磁性, 但少数样品呈现出抗磁性, 而且在17.86, 10.00 和6.42 K三个温度点出现磁化率突降的反常行为, 其中17.86 K处的突降很可能源于钾掺杂C₆₀引起的超导转变, 而后两者可能与钾掺杂对三联苯导致的超导相关. 研究结果有助于理解金属掺杂芳香烃有机超导体这一新兴超导家族的晶体生长和物理特性, 同时也提供了一种低温制备C₆₀和石墨的新方法.     

逐步增加的Ⅱ型截尾下冷贮备串联系统可靠性指标的Bayes估计

在逐步增加的Ⅱ型截尾模型下,运用Bayes方法,研究部件寿命服从双参数指数分布的冷贮备串联系统可靠性指标的近似置信区间问题.在两个参数均未知的情形下,给出了失效率,系统可靠度及平均寿命的Bayes近似置信区间的计算公式;对于超参数的确定,给出一种新的方法;最后进行了随机模拟,并对近似置信区间的精度进行了讨论.     

四维抛物型方程的高精度分支稳定的显式差分格式

对四维抛物型方程构造了一个高精度显格式,格式的稳定性条件为r=Δt/Δx2=△t/Δy2=△t/△z2=Δt/Δw2<1/2,截断误差阶达到O(Δt2 Δx4),通过数值实验,表明本文理论分析的正确性和文中格式较同类格式的优越性.